เกจวัดแก๊ส swap supplies an early warning alert to the potential of dry working conditions, cavitation and other pump points that may lead to emergency shutdowns and costly maintenance.
The FLT93 Series move switch reliably screens the flow and temperature of liquids, gases, and slurries. – Image: Fluid Components International
FCI’s FLT93 Series flow swap reliably screens the flow and temperature of liquids, gases, and slurries. It is designed for pump wet/dry detection, the place sudden, unexpected reductions in media move charges can go away pumps susceptible to over-heating situations that shutdown process lines and require troubleshooting and fixing. The SIL2 rated instrument is meant for heavy-duty, probably hazardous course of industry environments and comes with a comprehensive list of global safety approvals.
It has a no moving components design and presents a robust scheme for pump safety with its twin alarm capability. With Alarm 1, the switch detects a low circulate situation anyplace between 0.01 and three ft per second FPS (0.003–0.9 m per second MPS). This low move alarm is a pre-warning signal for the control system or operator who can then resolve to maintain the pump operating or to close it down.
If an Alarm 2 occurs as a result of the feed line to the pump is running dry, this would be an emergency signal to close down the pump instantly as a end result of the bearings now see fuel as a substitute of a liquid as a heat transfer media. In such situations, the temperature of the bearings might rise very fast. Using a move change prevents everlasting injury to the pump’s bearings.
Share