The Turbinator from Knowsley SK – Always providing precision proportioning

In-line water pushed foam proportioning pumps have turn out to be increasingly more popular within the final decade. Their low stress drop and accurate foam proportioning over a variety of flows are needed in plenty of techniques. But this know-how is not simple: the gear in the marketplace till nows fairly difficult and sensitive to contamination and over dashing. The new Turbinator water pushed foam proportioning pump developed by Knowsley SK effectively solves these problems, making this technology the popular selection for a variety of fire fighting methods.
Precision proportioning – Always
The Turbinator is a constructive displacement foam proportioning pump designed for Fixed and Mobile functions. The unit is driven by a particular volumetric water motor which is instantly coupled to a precision gear foam pump. Because each elements of the Turbinator are positive displacement devices, the ratio of foam concentrate to firewater is fastened over the full operating vary. This makes Turbinator the ideal proportioning expertise for techniques with completely different flows, such as multi-legged deluge systems, sprinkler techniques and mobile massive incident equipment.
The Turbinator unit doesn’t require establishing or on-site adjustment – the proportioning rate is achieved at any move rate and stress inside the operating vary.
MAXI Turbinator put in on mounted skid feeding foam pouring methods on storage tanks and bunds.
Technology constructed to last – Forever
With Turbinator expertise, Knowsley launched a flexible, abrasion resistant paddle material in the water motor which supplies the unit its distinctive put on traits. The ordinary contamination present in hearth water does not damage the paddles. Overspeed up to 120% of the nominal flow, which might occur during routinely managed activation of huge techniques, does not damage the unit. In addition, the Turbinator resists dry running in accordance with NFPA20.
Design and installation: Simple as 1-2-3
The close-coupled design presents a very compact and efficient set up with just three connections: hearth water inlet (1), foam focus inlet (2) and foam solution outlet (3). The unit may be put in directly into vertical or horizontal piping systems. The Turbinator foam pump delivers 3m suction height easily, which makes it possible to install the froth concentrate tank under the unit installation stage – even with high viscosity concentrates in arctic conditions (thick foams). Simple, cost efficient atmospheric foam tanks are fine for Turbinator.
With its distinctive low differential stress, Turbinator fits in essentially the most complicated methods, even when long pipe runs or static stress loss are concerned. Turbinator doesn’t require exterior power supply or control circuits and is secure for any ATEX environment.
The Turbinator is out there in three sizes from 500 l/min to 12’000 l/min with proportioning of 1% and 3% with freshwater and saltwater construction. Each Turbinator inbuilt our Manchester, UK factory is 100 percent functionally tested on a excessive flow check rig through its complete working vary making certain performance at all times.
For เครื่องมือที่ใช้วัดความดันคือ , go to

Scroll to Top