Peumatic Grouting pump is designed for stress and filling grouting of cement and bentonite slurries. It is primarily used for injecting (grouting) bar anchors and the drill holes to have the ability to reinforce the loose rock mass. The maximum grain measurement can not exceed zero.2 mm.
Grouting pump operation and upkeep is simple, safe and dependable. This pump is utilized in mines working under troublesome conditions as a outcome of it is dependable and explosion-proof.
Basic Pneumatic Grouting pump include: An air inlet, the pneumatic cylinder, mounting base frame and stand, stress gauge, pumping cylinder, outlet with quick launch coupling and wheels.
How it really works
Pneumatic stress within the air cylinder exerts a excessive strain on the grout mixture which outcomes in ejection of grout with a excessive strain and velocity. The valves of the air cylinder within the pump function automatically to actuate the cylinder. The pneumatic cylinder then moves the plunger up and down to finish the pumping cycle.
Pneumatic grout pump can be pushed even without Electrical power supply in remote areas by utilizing engine driven compressor.
Applications
The pump is majorly utilized in building and mining trade for injecting materials into wide and medium size gap in beams, columns ,basement partitions and flooring, carry shaft concrete wall fill-up and so forth. In mining industry it is used to replenish cement solution where there’s a gap exists between construction and rock and for soil stabilization.
Detachable design tends to simple maintenance and transportation. Challenging works like Grouting in Bridges.
เกจวัดแรงดันสูญญากาศ : How hydraulic submersible pumps work
This pump is broadly used in tunnels, coal mine, bridges and dams, building basis, and different underground tasks, and inflammable, explosive sites and other dangerous setting.
It has software in chemical trade also to pump out chemical slurries.
The pump is electricity free so, can be used at any website situation whether it’s rural or urban.
Mining Pneumatic Grouting pump has a bigger discharge slurry adjustment range. Generally the ultimate quantity of the grouting quantity is eight or10 instances of the quantity in the beginning. And the ultimate grouting quantity proves that filling is compacted.
Simply put; เกจวัดแรงดันลมราคา -pressure grouting pump is specially designed for high-pressure grouting. And it adopts full hydraulic drive, it’s pressure and flow could be adjusted in accordance with the necessities of grouting,(The circulate of grouting pump is 0-100L/min, strain of discharge is 0-10MPa).besides, This Pneumatic high-pressure grouting pump can be used for grouting single or double fluid.
High-pressure grouting pump is principally used for highways, railways, water and electrical energy, building, mining etc. ground/underground building.
Benefits
Mining Pneumatic Grouting pump has some nice benefits of low energy consumption, small vibration, low noise, small dimension, excessive effectivity, dependable performance, strain and flow control, lengthy life and so forth. Common mine grouting pump has pneumatic injection pump, twin fluid injection pump, extrusion injection pump and piston injection pump.
Pneumatic grout pump can be Light weight and with a wheelie design it can be carried simply. It is designed for straightforward operation and low maintenance. Last but not least its spare elements are easily obtainable.
Share